Ametek ROTRON Regenerative Blower DR555K72 081099 230/460 VAC 3 hp Three Phase

Product may differ slightly from picture.

Ametek ROTRON Regenerative Blower DR555K72 081099 230/460 VAC 3 hp Three Phase

AMETEK-ROTRON


0 pieces in stock.

In stock items ship same day, 4:30 pm EST cut-off time. Next day delivery is available for domestic orders.

Out of stock items typically ship within 2-3 weeks.

Please contact us for quantity-based discounts.

Free ground shipping is available on most online orders of $100 or more in the continental U.S.




Will not ship until

PRODUCT DETAILS

Part # DR555K72-081099
Series Industrial / Chemical Processing Blowers
Model DR555K72
Horse Power 3
Motor TEFC - CS
Voltage 230/460
Phase Three
Hz 50/60
Max Pressure IWG 115
Max Flow SCFM 190
Max Pressure Kpa 28.612
Max Pressure mbar 286.166
Max Flow litres/sec 89.6211
Max Flow m3/hour 317.11


Ametek ROTRON Regenerative Blower DR555K72 081099 230/460 VAC 3 hp Three Phase See the DR555K72 Product Bulletin / Catalog Page / Datasheet Here

 

The Ametek Rotron DR 555 series regenerative direct drive blower is designed for commercial spas, as well as hotels/motels, health clubs, and condominiums. These applications require a continuous duty blower with low noise levels (compliant with OSHA standards). The Ametek Rotron DR 555 series is manufactured in the USA. It is compliant with ISO 9001 requirements as well as with CE Marking standards (Declaration of Conformity available upon request). The blower housing is composed of cast aluminum with cast iron threaded flanges, and the motor is UL and CSA approved, as it contains permanently sealed ball bearings and Class B rated thermal protection.
Additional options of the Rotron DR regenerative blower include: (a) corrosion resistant surface treatments and sealing options; (b) remote drive-motorless-models; and (c) slip-on or face flanges for application-specific needs.
The maximum operating temperature for the motor should not exceed 140°C (Class F rated motors), and the maximum temperature of the outlet air for the blower should not exceed 140°C (this includes air temperature rise plus inlet temperature). The maximum pressure and suction/vacuum figures seen in the air flow x pressure performance curves (see datasheet, page 2) are based on a 40°C inlet and ambient temperature.

We Also Recommend