Ametek ROTRON Regenerative Blower DR523K72 037210 230/460 VAC 3 hp Single Phase

Product may differ slightly from picture.

Ametek ROTRON Regenerative Blower DR523K72 037210 230/460 VAC 3 hp Single Phase


1 pieces in stock.

In stock items ship same day, 4:30 pm EST cut-off time. Next day delivery is available for domestic orders.

Out of stock items typically ship within 4-6 weeks. Certain items currently have delayed lead-times due to global supply shortages.

Please contact us for quantity-based discounts.

Free ground shipping is available on most online orders of $100 or more in the continental U.S.


Part # DR523K72-037210
Series Industrial / Chemical Processing Blowers
Model DR523K72
Horse Power 3
Motor TEFC - CS
Voltage 230/460
Phase Single
Hz 50/60
Max Pressure IWG 158
Max Flow SCFM 84
Max Pressure Kpa 39.3104
Max Pressure mbar 393.167
Max Flow litres/sec 39.622
Max Flow m3/hour 140.196


See the Ametek ROTRON DR523K72 Product Bulletin / Catalog Page / Datasheet Here.

The Ametek Rotron DR 523 series regenerative direct drive blower is designed for commercial spas, as well as hotels/motels, health clubs, and condominiums. These applications require a continuous duty blower with low noise levels (compliant with OSHA standards). The Ametek Rotron DR 523 series is manufactured in the USA. It is compliant with ISO 9001 requirements as well as with CE Marking standards (Declaration of Conformity available upon request). The blower housing is composed of cast aluminum with cast iron threaded flanges, and the motor is UL and CSA approved, as it contains permanently sealed ball bearings and Class B rated thermal protection.

Additional options of the Rotron DR regenerative blower include: (a) corrosion resistant surface treatments and sealing options; (b) remote drive-motorless-models; and (c) slip-on or face flanges for application-specific needs.

The maximum operating temperature for the motor should not exceed 140°C (Class F rated motors), and the maximum temperature of the outlet air for the blower should not exceed 140°C (this includes air temperature rise plus inlet temperature). The maximum pressure and suction/vacuum figures seen in the air flow x pressure performance curves (see datasheet, page 2) are based on a 40°C inlet and ambient temperature.

We Also Recommend