Ametek ROTRON Regenerative Blower DR505AW58M-037935 115/230 VAC 2 hp Single Phase
Ametek ROTRON Regenerative Blower DR505AW58M-037935 115/230 VAC 2 hp Single Phase
Ametek ROTRON Regenerative Blower DR505AW58M-037935 115/230 VAC 2 hp Single Phase

Product may differ slightly from picture.

Ametek ROTRON Regenerative Blower DR505AW58M 037935 115/230 VAC 2 hp Single Phase

AMETEK-ROTRON


2 pieces in stock.

Out of stock items typically ship within 2-3 weeks.

*Contact us for additional quantity-based discounts.


FREE GROUND SHIPPING on most online orders of $100 or more in the continental U.S.





PRODUCT DETAILS

Part # DR505AW58M-037935
Series Application Specific Blowers
Model DR505AW58M
Horse Power 2
Motor ODP
Voltage 115/230
Phase Single
Hz 50/60
Max Pressure IWG 74
Max Flow SCFM 160
Max Pressure Kpa 18.4112
Max Pressure mbar 184.142
Max Flow litres/sec 75.4704
Max Flow m3/hour 267.04

 

The Ametek Rotron DR 505 series regenerative direct drive blower is designed for commercial spas, as well as hotels/motels, health clubs, and condominiums. These applications require a continuous duty blower with low noise levels (compliant with OSHA standards). The Ametek Rotron DR 505 series is manufactured in the USA. It is compliant with ISO 9001 and NAFTA requirements as well as with CE Marking standards (Declaration of Conformity available upon request). The blower housing is composed of cast aluminum with cast iron threaded flanges, and the motor is UL and CSA approved, as it contains permanently sealed ball bearings and Class B rated thermal protection.
Additional options of the Rotron DR regenerative blower include: (a) corrosion resistant surface treatments and sealing options; (b) remote drive-motorless-models; and (c) slip-on or face flanges for application-specific needs.
The maximum operating temperature for the motor should not exceed 140°C (Class F rated motors), and the maximum temperature of the outlet air for the blower should not exceed 140°C (this includes air temperature rise plus inlet temperature). The maximum pressure and suction/vacuum figures seen in the air flow x pressure performance curves (see datasheet, page 2) are based on a 40°C inlet and ambient temperature.

We Also Recommend