Ametek ROTRON Regenerative Blower DR505AS72M-037543 230/460 VAC 2 hp Three Phase_Optimal Distribution
Ametek ROTRON Regenerative Blower DR505AS72M-037543 230/460 VAC 2 hp Three Phase_Optimal Distribution
Ametek ROTRON Regenerative Blower DR505AS72M-037543 230/460 VAC 2 hp Three Phase_Optimal Distribution

Product may differ slightly from picture.

Ametek ROTRON Regenerative Blower DR505AS72M 037543 230/460 VAC 2 hp Three Phase

AMETEK-ROTRON


1 pieces in stock.

Out of stock items typically ship within 2-3 weeks.

*Contact us for additional quantity-based discounts.


FREE GROUND SHIPPING on most online orders of $100 or more in the continental U.S.





PRODUCT DETAILS

Part # DR505AS72M-037543
Series Industrial / Chemical Processing Blowers
Model DR505AS72M
Horse Power 2
Motor TEFC
Voltage 230/460
Phase Three
Hz 50/60
Max Pressure IWG 88
Max Flow SCFM 150
Max Pressure Kpa 21.8944
Max Pressure mbar 218.979
Max Flow litres/sec 70.7535
Max Flow m3/hour 250.35

 

Ametek Rotron DR505AS72M product bulletin datasheet See the DR505AS72M product bulletin / catalog page / datasheet here.

The Ametek Rotron DR 505 series regenerative direct drive blower is designed for commercial spas, as well as hotels/motels, health clubs, and condominiums. These applications require a continuous duty blower with low noise levels (compliant with OSHA standards). The Ametek Rotron DR 505 series is manufactured in the USA. It is compliant with ISO 9001 and NAFTA requirements as well as with CE Marking standards (Declaration of Conformity available upon request). The blower housing is composed of cast aluminum with cast iron threaded flanges, and the motor is UL and CSA approved, as it contains permanently sealed ball bearings and Class B rated thermal protection.
Additional options of the Rotron DR regenerative blower include: (a) corrosion resistant surface treatments and sealing options; (b) remote drive-motorless-models; and (c) slip-on or face flanges for application-specific needs.
The maximum operating temperature for the motor should not exceed 140°C (Class F rated motors), and the maximum temperature of the outlet air for the blower should not exceed 140°C (this includes air temperature rise plus inlet temperature). The maximum pressure and suction/vacuum figures seen in the air flow x pressure performance curves (see datasheet, page 2) are based on a 40°C inlet and ambient temperature.

We Also Recommend