Product may differ slightly from picture.
150145-60 Ametek Nautilair Brushless Blower 7.6" 100-240VAC
19 in Stock, Ready to Ship.
PRODUCT DETAILS
| Model | Nautilair (7.6"/193mm) |
| Output | - |
| Voltage | 100 - 240 VAC |
| Speed Control | 0 - 10 VDC |
| Speed Regulation | Closed Loop |
| Option Card | No |
| Stages | 1 |
| Flow Classification | High Output |
| Discharge Size | 2.8" Bolt Circle, D modified |
| Performance Class | High Output |
| Electrical Connections | 5-Cavity Connector on Flying Leads with Two Power, Two 0 - 12 VDC Command Signal Leads and One Ground/Earth Lead |
| Skid Qty | 60 |
| Max Pressure in.H2O | 46.57 |
| Max Pressure Kpa | 11.59 |
| Max Pressure mbar | 115.88 |
| Max Flow SCFM | 223.26 |
| Max Flow litres/sec | 105.31 |
| Max Flow m3/hour | 379.32 |
Ametek DFS Nautilair brushless DC variable speed blowers have been engineered to provide practical, compact, and efficient combustion solutions, and their performance levels have tested higher than many competitor blowers of the same size. Nautilair blowers are designed to deliver a precise, measured level of air and fuel mixtures in gas-fired burner systems and come in three size options: (a) 7.6” / 193 mm; (b) 8.9” / 226 mm; and (c) 12.3” / 312 mm. All Nautilair blowers are programmable for various speed control profiles and allow for three primary speed signals: 0-10VDC electrical analog; pulse width modulation (PWM); and mechanical potentiometer (directly on the blower unit). The Ametek Nautilair brushless DC combustion blower motors are used in a variety of applications, including residential and commercial heaters and boilers, food service equipment such as ovens, and even fuel cells, among many others.
The Ametek Nautilair 7.6” brushless blower model / part number 150145-60 is designed specifically for a BOFA PrintPRO Universal fume extraction / filtration system (BOFA vacuum pump motor part # A1050017, model BOFA AD 350).
The Ametek Nautilair blower 150145-60 is manufactured with a universal drive, dual-voltage feature and all stainless-steel components in the working fan system (including the bearings, shaft, nut and washers). The blower also comes with a special motor cover with axial slots. This part is RoHS Compliant.
If you need additional resources (performance curve data, cad drawings, etc.), please contact us.
If we are out of stock of this motor, for a potential replacement see: Ametek Nautilair 150145-50 (click here).
See Ametek DFS’s full catalog of Nautilair brushless blowers available here (click).
